|
|
|
|
1. Predetermine position as to where mobile air conditioner is to be sited.
2. Indicate exact position on window as to where venting kit is to be installed.
3. Cut circle in window glass cutter 5 1/8” (130 mm) to make hole.
4. Assemble exterior window fitting flanges. First ensuring that the black rubber seal supplied is fitted on inside of exterior flange thus ensuring that the rubber seal is fitted on the outside of window glass separating the two flanges, screw together with relevant screws supplied.
5. Fit outside weather cowl to exterior window flanges N.B. 6. Select applicable hose connector to receive either 3” or 4” air conditioner venting hose and fit together with studs and tape supplied and then fit connector into interior window fitting flange.
7. Should you wish to temporary resite your mobile air conditioning system, remove hose connector, with hose attached from interior wall flange, the interior wall fitting flange can be blanked off with the interior cover plate supplied.
|
|
Copyright © 1999 Airtech Air Conditioning
|
