Mains Supply and Electrical Connections:

Note:  Always disconnect from the mains electricity supply before carrying out any work to the pump or air conditioning unit. This work should be carried out by a qualified electrician.    

The pump unit’s power supply (230V 50HZ) should be connected to the air conditioning unit via a 3 amp in-line fuse (not supplied). This in-line fuse protects the cable between nominal 15 Amp mains supply and the pump.

Where a separate electrical supply is used it should have a double pole isolator with a contact separation of at least 3 mm and be fused at 3 Amps.

An electrical connections diagram is shown below.

Note: The float switch connections are inter-changeable on the connections marked Switch.

STANDARD & FREESTYLE PUMPS 

ELECTRICAL CONNECTIONS DIAGRAM

[ Home ] [ Up ]

Copyright © 1999 Airtech Air Conditioning
Last modified: May 08, 2005